Conservatory Door Lock Repairs
Conservatory door locks are a critical element of your home's security. It is essential to call a locksmith as soon when they begin to fail.
Most conservatory door locks are repairable easily and quickly. The most common problems are: sagging hinges, floppy door handles, and locking issues.
Locks damaged or defective
When it comes to your conservatory doors, securing them properly is a must. If you find that your lock is damaged or defective, contact an expert to get it fixed as soon as possible. This will help prevent any potential break-ins or damage to property.
Make sure the hinges are checked first to determine if the lock isn't functioning as it should. You may need to tighten them in order to prevent the door from sliding. If this does not solve the problem it could be because the bolt or latch is faulty and needs to be replaced.
Another issue that is common is that the key won't turn inside the cylinder. This could be due to many problems, such as dust and dirt that build in the lock. If this is the case, try cleaning the debris and applying a lubricant to allow the mechanism to move around again.
You might also find that your key isn't turning on the cylinder due to it having become displaced. This is more common with older locks, which have seen a lot of wear. In this case it is best to leave the repairs to a professional. They can perform a more thorough examination of the problem and make the necessary repairs.
If your uPVC locks are broken and you need to replace the entire mechanism. This can be a daunting task and should only be handled by a professional. To accomplish this, you'll need to remove the handle and remove the spindles and handles, and wiggle the mechanism. You'll need to take measurements of the principal dimensions to be able to buy a replacement mechanism that is compatible with.
Lastly, your lock might not be able to close or open due to a malfunctioning multipoint locking system, or a security hook or bolt that has become stuck. This will likely require the expertise of a locksmith professional and will usually involve disassembling the entire lock.
Sagging Hinges
Many door sag problems are caused by loose frame screws or hinge screws. If tightening the screws does not solve the problem then you can consider adding reinforcements to help the hinges stay in their place. Fill the gap between the frame and hinge using pennies, wood veneer or popsicle stick. If you are unable to find a suitable material, you can try longer screws, because they'll be able grab deeper into the studs and provide stronger support.
Screw the hinge into place once you've inserted the shims. The screws should be tightened a few times at each time. Be careful not to tighten them too much and cause damage to the hinges or frames. Test the door to make sure it's closing and latching correctly. You can add a third hinge if you've resolved the sagging problem. This will help distribute the weight more evenly and prevent future issues.
If the sagging is due a jamb that is not aligned properly You can use longer screws to draw the jamb tighter. To do this, remove an existing screw from the hinge's lock side. Replace it with a larger one that extends beyond framing. Repeat the process for any screws remaining on the hinge.
The strike plate could also be in the incorrect position. This could cause the door to be pushed against the frame, creating scuff marks which make it difficult for the latch to grab. You can sand the edges of the strike plate using an orbital or hand sander.
aldershot Conservatory Roof Repairs
Over time the screws securing your door handle mechanism can loosen and cause it to feel floppy. This is not only inconvenient but it could also pose an security risk since it may indicate that the internal mechanisms aren't functioning properly to keep your home from being invaded. A floppy handle can be difficult to lock as you may need to apply pressure.
This is usually a simple fix. Find the screw that holds the barrel part of the handle and tighten it. Try loosening the screws and see if it realigns the handle back into an upright position.
You might also have to lubricate the spring in your uPVC handle. This is a straightforward task that can be done using some household grease or WD40.
Once you have removed the door handle and taken it apart you should be able to see if there are any loose or missing screws. By using a screwdriver you can tighten any loose screws or replace them if damaged or broken. After cleaning the screw heads, apply an alcohol-soaked towel to wash away any oil residues. You can then apply a threadlocker to the screws to ensure that they stay in place.
In certain situations, it could be required for the entire uPVC lock mechanism to be replaced. If this is the case, always choose a reputable handle set like a Sold Secure SS301 or 2* Kitemark. This will ensure that your conservatory is as secure as it can be and can prevent break-ins.
It is recommended to get your locks checked regularly by a professional locksmith. This will keep them in good condition and will reduce the risk of components that are defective developing. It is also recommended to upgrade your locks and handles to a more secure level while you are doing so. This will help prevent unauthorised entry and improve the security of your family and you.
Locked out
If your key turns and spins inside the lock, but the door isn't unlocking you could be locked out. Before you attempt to alter the lock, contact a professional because they'll be able to gain access without damaging your lock or door and will have replacement locks on hand. This issue can be caused by a door that is not aligned properly. The hinges can easily be adjusted to correct this. Other times this may be due to a failed lock, which requires replacing.
Do not try to open the door of your conservatory with force as it could cause damage to the lock mechanism, causing you to be locked out!